I was unable get the old avatars reimported. Regretfully, you will have to upload your avatar again. Please report any issues here,.

Barbed Wire Enduro - July 10

Want to go for a DAMN Ride? So do we! :whoop:
Post Reply
User avatar
Skinny-J
DAMN Admin
Posts: 1544
Joined: Mon Mar 24, 2008 3:05 pm
Contact:

Barbed Wire Enduro - July 10

Post by Skinny-J »

Wingfixer and I rode this enduro last year and really liked it; so we are heading back again this year.

Link to flyer:http://www.ecea.org/forums/index.php?showtopic=29969

From the Club:
"STER terrain is NOT a PA style rock run, not even close. It is more loam, and loose rock mixed with tree roots. Basically the perfect mix for awesome motorycle trails.

The Sunday/Adult Barbed Wire Enduro July 10th starts at 144 Sitzer Rd Gillet PA. Key time 8:00am
Same hard work and and new fresh cut trail went into this event. As I said it may be our best layout ever. NO trickery but this is a timekeeping enduro. There will be a short couple mile transfer section heading out from camp but after that expect to check in at the start of every section and pin it to the end of the section to check out. Course is aprox 65 miles long with first loop being 25 miles and coming back to camp for gas. Second loop is 40 miles and includes the Infamous SLIDE before the last timed section of the day. What's the SLIDE you ask. Its a 150yd long 30ft wide hillclimb with multiple lines and hundreds of local spectators cheering you on. There is a bypass for anyone that is ok with getting heckled by the fans.

Hope to see everyone for a fresh refreshment at the finish provided by the club!!!!!!!!!"


We have 1 or 2 x-tra spots in the truck for anybody who is interested.....

SJ
User avatar
J&J
DAMN Grand Poohba
Posts: 1003
Joined: Sat Jan 05, 2013 10:54 pm
Contact:

Re: Barbed Wire Enduro - July 10

Post by J&J »

Well we're interested but that place is up the road 4 1/2 hours....
User avatar
Skinny-J
DAMN Admin
Posts: 1544
Joined: Mon Mar 24, 2008 3:05 pm
Contact:

Re: Barbed Wire Enduro - July 10

Post by Skinny-J »

J&J wrote:Well we're interested but that place is up the road 4 1/2 hours....
Confucius say what is worth while is difficult.... :think:
User avatar
Wingfixer
aka FlatFixer
Posts: 4012
Joined: Tue Nov 18, 2008 4:20 pm
Contact:

Re: Barbed Wire Enduro - July 10

Post by Wingfixer »

J&J wrote:Well we're interested but that place is up the road 4 1/2 hours....
Pfft. You guys are going to be sitting in the (a) truck for 28+ hours in a couple weeks and you're worried about a mere 4 hour ride? Meet up at SJ's and we'll call it a warm up for the main event! :lol2:
F*** work.
Ride motorcycles.
User avatar
Wingfixer
aka FlatFixer
Posts: 4012
Joined: Tue Nov 18, 2008 4:20 pm
Contact:

Re: Barbed Wire Enduro - July 10

Post by Wingfixer »

Skinny-J the J&J crew and I had an awesome day of riding yesterday! Really one of the best days I've spent on a dirt bike! Most of us finished......I'll let skinny fill in the details. I got some good footage with my new gopro, I'll post that up after some editing. Just a great day though! Really looking forward to Colorado!
F*** work.
Ride motorcycles.
User avatar
Skinny-J
DAMN Admin
Posts: 1544
Joined: Mon Mar 24, 2008 3:05 pm
Contact:

Re: Barbed Wire Enduro - July 10

Post by Skinny-J »

Skiny-J engine go Kow-plowey...

Image

Crank bearing ceased.... :barf:
User avatar
Wingfixer
aka FlatFixer
Posts: 4012
Joined: Tue Nov 18, 2008 4:20 pm
Contact:

Re: Barbed Wire Enduro - July 10

Post by Wingfixer »

And you say I am hard on equipment?
F*** work.
Ride motorcycles.
trialsrider
DAMN Expert
Posts: 442
Joined: Wed Jan 14, 2009 3:57 pm
Contact:

Re: Barbed Wire Enduro - July 10

Post by trialsrider »

Must not be a KTM :cheers: Hehehe.... Go Orange :oops: or white in my case.
2019 Husqvarna TE250i
2014 KTM 350 XCF-W Six Days
2012 GASGAS 280 TXT Racing
User avatar
gots_a_sol
DAMN Grand Poohba
Posts: 1011
Joined: Sat Jul 26, 2014 7:08 am
Contact:

Re: Barbed Wire Enduro - July 10

Post by gots_a_sol »

That sucks. I just had to send out my husky bottom end for a rebuild as the big end rod bearing was about to let go (caught it when it started going tap tap tap tap tap tap tap haha)
-Joe.

GMER/WATR member
'17 Beta 250RR/RE
'09 Husky WR177
'17 Oset 20.0
User avatar
J&J
DAMN Grand Poohba
Posts: 1003
Joined: Sat Jan 05, 2013 10:54 pm
Contact:

Re: Barbed Wire Enduro - July 10

Post by J&J »

Meanwhile Jacob got a 3rd place. Would have won if we hadn't burned 2 checks & spent 10 minutes deciding Skinny's bike was broke.... :dirtdog: :jack:
It's all good but man he's smokin, guess I need to fork over some money on an ICO computer for him :shrug:
Post Reply