I was unable get the old avatars reimported. Regretfully, you will have to upload your avatar again. Please report any issues here,.
Barbed Wire Enduro - July 9
Re: Barbed Wire Enduro - July 9
I'm interested, I'll let you know if I can pull it off.
- gots_a_sol
- DAMN Grand Poohba
- Posts: 1011
- Joined: Sat Jul 26, 2014 7:08 am
- Contact:
Re: Barbed Wire Enduro - July 9
A little less in after today Hopefully I can get ANOTHER replacement in quickly.
-Joe.
GMER/WATR member
'17 Beta 250RR/RE
'09 Husky WR177
'17 Oset 20.0
GMER/WATR member
'17 Beta 250RR/RE
'09 Husky WR177
'17 Oset 20.0
Re: Barbed Wire Enduro - July 9
Ouch.gots_a_sol wrote: ↑Thu Jun 29, 2017 10:21 pm A little less in after today Hopefully I can get ANOTHER replacement in quickly.
That will make the dead engine starts a little more interesting....
Re: Barbed Wire Enduro - July 9
Thankfully the MILF check isn't in the Mooseknuckle Shuffle section. Whew!
"2 Strokes still rule!!"
- gots_a_sol
- DAMN Grand Poohba
- Posts: 1011
- Joined: Sat Jul 26, 2014 7:08 am
- Contact:
Re: Barbed Wire Enduro - July 9
Bored out the pieces of my kick shaft and put a rod in, then welded everything.
I've been kicking the bike a bunch and I can see it starting to bend and a tiny crack forming already I'll call the dealer tomorrow but I doubt I'll see it by the weekend.
I'll see if I can get one of the other poor neglected steeds working/not leaking all over by the weekend
I've been kicking the bike a bunch and I can see it starting to bend and a tiny crack forming already I'll call the dealer tomorrow but I doubt I'll see it by the weekend.
I'll see if I can get one of the other poor neglected steeds working/not leaking all over by the weekend
-Joe.
GMER/WATR member
'17 Beta 250RR/RE
'09 Husky WR177
'17 Oset 20.0
GMER/WATR member
'17 Beta 250RR/RE
'09 Husky WR177
'17 Oset 20.0
Re: Barbed Wire Enduro - July 9
Better order two of them....gots_a_sol wrote: ↑Tue Jul 04, 2017 5:49 pm I'll call the dealer tomorrow but I doubt I'll see it by the weekend.
Re: Barbed Wire Enduro - July 9
I'll go if you guys are going, don't know about the boy.
Re: Barbed Wire Enduro - July 9
I'm gonna be faster now... or crash less...
Or something...
Everyone's been telling me to get one
Or something...
Everyone's been telling me to get one
- gots_a_sol
- DAMN Grand Poohba
- Posts: 1011
- Joined: Sat Jul 26, 2014 7:08 am
- Contact:
Re: Barbed Wire Enduro - July 9
Nice.
I ordered a new shaft and gasket, but ETA is Tuesday. There goes $137 out the window Should have just bought the new one right off the bat instead of hoping to fix this one. Oh well.
I'm a bit burned out on messing with bikes right now so I'm just going to get some 'work on my old ass truck' therapy this weekend instead
I ordered a new shaft and gasket, but ETA is Tuesday. There goes $137 out the window Should have just bought the new one right off the bat instead of hoping to fix this one. Oh well.
I'm a bit burned out on messing with bikes right now so I'm just going to get some 'work on my old ass truck' therapy this weekend instead
-Joe.
GMER/WATR member
'17 Beta 250RR/RE
'09 Husky WR177
'17 Oset 20.0
GMER/WATR member
'17 Beta 250RR/RE
'09 Husky WR177
'17 Oset 20.0
- gots_a_sol
- DAMN Grand Poohba
- Posts: 1011
- Joined: Sat Jul 26, 2014 7:08 am
- Contact:
Re: Barbed Wire Enduro - July 9
Anybody end up going?
-Joe.
GMER/WATR member
'17 Beta 250RR/RE
'09 Husky WR177
'17 Oset 20.0
GMER/WATR member
'17 Beta 250RR/RE
'09 Husky WR177
'17 Oset 20.0