Nice Jed!
The B&B is booked. 27th-4th. FL here we come! Need to figure out how to hang the ~14' kayak inside the van this weekend.
Ordered a Shinko 540 earlier this week. Hope that's decent enough.
Phoo, yeah I understand sand is going to get everywhere. Bike is going to have to get a thorough cleaning/teardown when it comes back. I read most places recommend not lubing your chain - or just using silicone spray on it.
I was unable get the old avatars reimported. Regretfully, you will have to upload your avatar again. Please report any issues here,.
Ocala FL
Re: Ocala FL
Stephen (not Steve) - '20 Husky 701LR / KTM '20 500 EXC / '17 150 XC-W / '21 E-XC / '21 890R / '19 Sherco 300FST / Sur-Ron LBX / Segway X160 / Sur-Ron Ultra Bee
Re: Ocala FL
juddspaintballs wrote: ↑Tue Feb 18, 2020 3:00 pm 85 degrees in Spring Hill, FL
nice! Croom is only a few miles from there.
Beta Evo Sport 300 4T "running crisp again thanks to Jtrobb"
KTM 150 XCW tpi
KTM 890 ADV R
GASGAS EX 450F
KTM 150 XCW tpi
KTM 890 ADV R
GASGAS EX 450F
Re: Ocala FL
breaking in the new 500 Stephen?smdub wrote: ↑Wed Feb 19, 2020 10:26 pm Nice Jed!
The B&B is booked. 27th-4th. FL here we come! Need to figure out how to hang the ~14' kayak inside the van this weekend.
Ordered a Shinko 540 earlier this week. Hope that's decent enough.
Phoo, yeah I understand sand is going to get everywhere. Bike is going to have to get a thorough cleaning/teardown when it comes back. I read most places recommend not lubing your chain - or just using silicone spray on it.
Beta Evo Sport 300 4T "running crisp again thanks to Jtrobb"
KTM 150 XCW tpi
KTM 890 ADV R
GASGAS EX 450F
KTM 150 XCW tpi
KTM 890 ADV R
GASGAS EX 450F
Re: Ocala FL
Not enough time to get it ready unfortunately. Skid plate/etc won't be here in time. I've decided to take the 150XCW since its >20kg lighter than my older 500 (and Dan's 2016 500!). Knowing him, we'll be picking up and pulling the bikes out plenty.
Stephen (not Steve) - '20 Husky 701LR / KTM '20 500 EXC / '17 150 XC-W / '21 E-XC / '21 890R / '19 Sherco 300FST / Sur-Ron LBX / Segway X160 / Sur-Ron Ultra Bee
Re: Ocala FL
post up some pics of the place if you have time
Beta Evo Sport 300 4T "running crisp again thanks to Jtrobb"
KTM 150 XCW tpi
KTM 890 ADV R
GASGAS EX 450F
KTM 150 XCW tpi
KTM 890 ADV R
GASGAS EX 450F
Re: Ocala FL
I'll try! I have on my 'todo list' to mount my other quadlock mount on the 150 so I can get to my cellphone cam quick. I also have a rugged Olympus TG6 pocket cam that should survive me repeatedly falling on it.
Stephen (not Steve) - '20 Husky 701LR / KTM '20 500 EXC / '17 150 XC-W / '21 E-XC / '21 890R / '19 Sherco 300FST / Sur-Ron LBX / Segway X160 / Sur-Ron Ultra Bee
Re: Ocala FL
Skid plate and Florida????
2022 TRS 300 E-start
2021 Beta 300rr
2021 Beta 300rr
Re: Ocala FL
lots and lots of exposed roots, or roots just plain stick out pointing toward you.. suppose of the soft terrain, first thing I noticed when I was riding at Croom. Also vines tough as nails that like to wrap around your wheel
Beta Evo Sport 300 4T "running crisp again thanks to Jtrobb"
KTM 150 XCW tpi
KTM 890 ADV R
GASGAS EX 450F
KTM 150 XCW tpi
KTM 890 ADV R
GASGAS EX 450F
Re: Ocala FL
I said "etc";) Most critical things are ordered except the full wrap handguards. I'll destroy controls w/ the flimsy stock guards (BTDT.) Not settled on which ones to get yet. I have the BRP hand guard mounts on one of the other bikes and it runs into the clutch hose pretty bad (I need to cut it for some clearance still so there is no sharp edge.) Takes a lot of custom bending of the guard bars to get everything to fit too. Maybe the Cycra bar clamp mounts or even their triple mounts fit better. I've ordered a Clake Prolever which may complicate fitting things but won't know until I have it in hand.
Stephen (not Steve) - '20 Husky 701LR / KTM '20 500 EXC / '17 150 XC-W / '21 E-XC / '21 890R / '19 Sherco 300FST / Sur-Ron LBX / Segway X160 / Sur-Ron Ultra Bee