I was unable get the old avatars reimported. Regretfully, you will have to upload your avatar again. Please report any issues here,.

FWW install

DAMN maintenance and repair thread; including Farkle Fests! :boohoo:
User avatar
Boom Boom
DAMN Grand Poohba
Posts: 3327
Joined: Wed Aug 26, 2009 7:26 am
Contact:

Re: FWW install

Post by Boom Boom »

dirtygrunt wrote:
Firebolter wrote:Works for clutch and drive gears as well. Of course you have to pop off the clutch side case to get to the crank/clutch gears to use this tool, but it holds them perfectly and doesn't hurt the gears like a penny or screw driver can! Torque away. While jamming something in the wheel works, you can mess up spokes sometimes. On the trail, sure this method works well, but if you have the time, take time to not damage parts if possible.

http://www.motionpro.com/motorcycle/partno/08-0427/

Nice thing, it has a little magnet that holds it in place until the gears lock up on the tool.

Image
Simple technology that works :thumbup:


BTW -night and day difference-rode a little this morning and Wow!



Sounds like you are ready for a farm loop rip.... :roost:
2022 TRS 300 E-start

2021 Beta 300rr
User avatar
Laoch
DAMN Admin
Posts: 3823
Joined: Sat Mar 08, 2008 11:51 am
Contact:

Re: FWW install

Post by Laoch »

Boom Boom wrote: Sounds like you are ready for a farm loop rip.... :roost:
:thumbup:
I hope to make it to the Blind Enduro next month. I have a decent acre here with bumps, rock, logs and a few things to make it interesting.
Bruce
Post Reply