My SM wheels should be in tomorrow, i'll use them for longer
trips (Ocean City .) but i need the kickstand shortened, i've
already ordered a used one.
Does someone in here have the equipment needed to cut the old
one by about 2 inches and weld the plate back on?
If so please let me know
I was unable get the old avatars reimported. Regretfully, you will have to upload your avatar again. Please report any issues here,.
Shorten a kickstand > Welder needed
Re: Shorten a kickstand > Welder needed
Too bad Al isn't here anymore. He shortened the kickstand for my DR. A pretty darn professional job too. All for no cost. I think I bought him lunch maybe.
What do you have for a dualsport/motard?
What do you have for a dualsport/motard?
Yamaha WR250R
Yamaha TW200
Yamaha TW200
Re: Shorten a kickstand > Welder needed
+1 on Racer Al - for a few beers and some pizza he extended the side stand on my KLR and the center stand - top notch job.
Ken
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Re: Shorten a kickstand > Welder needed
illenium wrote: Does someone in here have the equipment needed to cut the old
one by about 2 inches and weld the plate back on?
If so please let me know
Your welcome to repair at my place, or i can do or help. not sure if this weekend will be good might have to be next week sometime.
Re: Shorten a kickstand > Welder needed
Yeah, I miss you guys, too!
I need to put a sign up in my shop on torn, dirty cardboard, written in scratchy magic marker "will work for food".
If you want to mail or fedex stuff, I'm still happy to do it, although I still need to locate a local vendor for shielding gas.
You'd be without your kickstand for a week or so, however.
a
I need to put a sign up in my shop on torn, dirty cardboard, written in scratchy magic marker "will work for food".
If you want to mail or fedex stuff, I'm still happy to do it, although I still need to locate a local vendor for shielding gas.
You'd be without your kickstand for a week or so, however.
a
Re: Shorten a kickstand > Welder needed
Good welder in Spencerville, MD, Mark Bailey.
301-421-1832.
Reasonable prices.
301-421-1832.
Reasonable prices.
DRZ S and SM
Vertemati SM
KTM 520 EXC
Vertemati SM
KTM 520 EXC
Re: Shorten a kickstand > Welder needed
@bucho > an 07 KLX250 i bought new last year at Pete's
@hara > sounds good, i have to wait for the new kickstand
though, the seller from ebay takes alot of time to send my little package
i bought the wheels from craigslist seattle and had 'em shipped to me, i didn't
know the guy included his old kickstand, but its a rather poor job, the paint
is all over your hand when you touch it and they cut it in an unexplainable
way and welded it back together, doesnt seem save
@all thanks for quick reply... hope to see some of you on the road this year
@hara > sounds good, i have to wait for the new kickstand
though, the seller from ebay takes alot of time to send my little package
i bought the wheels from craigslist seattle and had 'em shipped to me, i didn't
know the guy included his old kickstand, but its a rather poor job, the paint
is all over your hand when you touch it and they cut it in an unexplainable
way and welded it back together, doesnt seem save
@all thanks for quick reply... hope to see some of you on the road this year
Re: Shorten a kickstand > Welder needed
just so you guys know Im a pretty good welder always fabin something up, send me the kickstand I'll shorten and weld that bitch for ya!
2002 XR650R (plated)
1990 TransAlp
2000 XR650R (trophy)
2002 CR125R
2009 Big Red
1977 CT90
2008 CRF230L (wifeys)
2003 XR650R (crackbabys)
1999 CR80R (crackbabys)
1972 XL250 (crackbabys)
1990 TransAlp
2000 XR650R (trophy)
2002 CR125R
2009 Big Red
1977 CT90
2008 CRF230L (wifeys)
2003 XR650R (crackbabys)
1999 CR80R (crackbabys)
1972 XL250 (crackbabys)
-
- DAMN n00b
- Posts: 16
- Joined: Mon May 12, 2008 8:58 am
- Contact:
Re: Shorten a kickstand > Welder needed
If you are still interested in someone to shorten your kickstand, I used Automotive Parts and Machine at 900 E. Patrick St., Frederick, 301-663-8866. I was happy with the work, and I am still using it 2 years later so it is holding up fine.
Rich
Rich
KLRThumper
------------------------
07 KLR 650 (with 22,000 miles)
09 V Strom 650
------------------------
07 KLR 650 (with 22,000 miles)
09 V Strom 650
Re: Shorten a kickstand > Welder needed
WHAT! You didn't go to Rudy's Beer and Welding?KLRThumper wrote:If you are still interested in someone to shorten your kickstand, I used Automotive Parts and Machine at 900 E. Patrick St., Frederick, 301-663-8866. I was happy with the work, and I am still using it 2 years later so it is holding up fine.
Rich
Ken
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris