KTM Studs Set

Buy, sell, trade... or just give away the DAMN thing! :deal:
Post Reply
User avatar
Marylander
DAMN Admin
Posts: 1428
Joined: Wed Oct 16, 2013 8:13 pm
Contact:
Contact Marylander

Re: KTM Studs Set

Post by Marylander » Wed Jan 07, 2015 3:04 pm

Firebolter wrote:most modern two strokes can be re-built for ~200 bucks or less (piston/rings/pin/circlips/gaskets) unless you need cylinder work and even then, that can be had for additional 200-300 from a place like LA Sleeve. if you are paying 800 for a 2 stroke re-build, it is more than just a typical re-build. If guys would replace rings more often, motors would live alot longer.
Right, right, I'm talking a full rebuild including aftermarket crank and cylinder plating.
Top
Jar944
DAMN n00b
Posts: 14
Joined: Fri Nov 29, 2013 11:15 am
Contact:
Contact Jar944

Re: KTM Studs Set

Post by Jar944 » Fri Jan 09, 2015 9:14 am

Firebolter wrote:most modern two strokes can be re-built for ~200 bucks or less (piston/rings/pin/circlips/gaskets) unless you need cylinder work and even then, that can be had for additional 200-300 from a place like LA Sleeve. if you are paying 800 for a 2 stroke re-build, it is more than just a typical re-build. If guys would replace rings more often, motors would live alot longer.
I typically replace the crank and bearings as well, & used YZ's always seem to need a replate :shrug:
Top
Post Reply

Return to “Flea Market”

Who is online

Users browsing this forum: jgreene and 11 guests