Machine Shop Recommendation?
Machine Shop Recommendation?
I live in Frederick (Braddock Heights) and just need a steering stem pressed out of a triple clamp, turned down to a smaller diameter and pressed back in place.
Looking for recommendation on where to take it.
THANKS!
OFG
Looking for recommendation on where to take it.
THANKS!
OFG
Sam Jones - Frederick MD
GL1800 DCT TRIO Tilting Trike - KTM 525 EXC - KTM 200 XCW - 2 KTM Freeride 250Rs - TRS 300 Xtrack Trials
Lots of E-Bikes/MCs
Polaris RZR 800
Lots of MTBs and Road Bikes and a BamBuk Recumbant Tandem Trike eBike
GL1800 DCT TRIO Tilting Trike - KTM 525 EXC - KTM 200 XCW - 2 KTM Freeride 250Rs - TRS 300 Xtrack Trials
Lots of E-Bikes/MCs
Polaris RZR 800
Lots of MTBs and Road Bikes and a BamBuk Recumbant Tandem Trike eBike
Re: Machine Shop Recommendation?
call Curtis at Full Circle V-Twin in Hagerstown. (240) 347-4663
Tell him I sent ya.
Tell him I sent ya.
Ken
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Re: Machine Shop Recommendation?
X2 for Curtis
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: Machine Shop Recommendation?
I had one excellent result with Curtis. BUT the last time is was pretty much a disaster. He took a month to do a one or two hour job even after I told him I REALLY needed it in a few days (2 weeks into the month) and sort of refused to answer my inquiries as to what was happening. etc. So I need to go somewhere else.
Sam Jones - Frederick MD
GL1800 DCT TRIO Tilting Trike - KTM 525 EXC - KTM 200 XCW - 2 KTM Freeride 250Rs - TRS 300 Xtrack Trials
Lots of E-Bikes/MCs
Polaris RZR 800
Lots of MTBs and Road Bikes and a BamBuk Recumbant Tandem Trike eBike
GL1800 DCT TRIO Tilting Trike - KTM 525 EXC - KTM 200 XCW - 2 KTM Freeride 250Rs - TRS 300 Xtrack Trials
Lots of E-Bikes/MCs
Polaris RZR 800
Lots of MTBs and Road Bikes and a BamBuk Recumbant Tandem Trike eBike
Re: Machine Shop Recommendation?
I had a similar experience several years ago. I thought he was reformed. Hopefully that was an exception.BigBird wrote:I had one excellent result with Curtis. BUT the last time is was pretty much a disaster. He took a month to do a one or two hour job even after I told him I REALLY needed it in a few days (2 weeks into the month) and sort of refused to answer my inquiries as to what was happening. etc. So I need to go somewhere else.
Ken
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
- anotherguy
- DAMN Expert
- Posts: 439
- Joined: Thu Sep 01, 2011 7:04 am
- Contact:
Re: Machine Shop Recommendation?
Bill Coleman Linthicum MD. A bit of a drive for you but he will do a good job and not burn you on cost. 410-799-2906 I've known Bill since I was a kid and he's always been busy so if you're in a hurry he may not be your guy. Nicest guy you'll ever meet.
Re: Machine Shop Recommendation?
A buddy of mine tells me all kinds of stories from when he used to work at Coleman Brother Speed Shop; I think Bill was one of the owners. From the stories, it was a pretty fun place to work....anotherguy wrote:Bill Coleman Linthicum MD. A bit of a drive for you but he will do a good job and not burn you on cost. 410-799-2906 I've known Bill since I was a kid and he's always been busy so if you're in a hurry he may not be your guy. Nicest guy you'll ever meet.
-
- DAMN Expert
- Posts: 442
- Joined: Wed Jan 14, 2009 3:57 pm
- Contact:
Re: Machine Shop Recommendation?
Man that was a great place. I spent many my days in my youth there.Skinny-J wrote:A buddy of mine tells me all kinds of stories from when he used to work at Coleman Brother Speed Shop; I think Bill was one of the owners. From the stories, it was a pretty fun place to work....anotherguy wrote:Bill Coleman Linthicum MD. A bit of a drive for you but he will do a good job and not burn you on cost. 410-799-2906 I've known Bill since I was a kid and he's always been busy so if you're in a hurry he may not be your guy. Nicest guy you'll ever meet.
Sent from my iPhone using Tapatalk
2019 Husqvarna TE250i
2014 KTM 350 XCF-W Six Days
2012 GASGAS 280 TXT Racing
2014 KTM 350 XCF-W Six Days
2012 GASGAS 280 TXT Racing
Re: Machine Shop Recommendation?
I have a lathe but no press.
Ken
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Re: Machine Shop Recommendation?
Wow, small world. Did you know a counter-guy named Tom Lenhoff? That's my buddy...trialsrider wrote:
Man that was a great place. I spent many my days in my youth there.
Who is online
Users browsing this forum: No registered users and 11 guests