I have been having problems with the server running out of resources and giving errors. It is better but I'm still getting some periodically. Please report any you get to me at ken@kyler.com.
Joe's Beta thread
- Marylander
- DAMN Admin
- Posts: 1428
- Joined: Wed Oct 16, 2013 8:13 pm
- Contact:
Re: This is what you do with new bikes, right?
10% off code (SIERRABMWRIDEON) through 5/15 for http://www.motosupply.com (aka sierra bmw).
- gots_a_sol
- DAMN Grand Poohba
- Posts: 1015
- Joined: Sat Jul 26, 2014 7:08 am
- Contact:
Re: This is what you do with new bikes, right?
Sweet. I'm sure there is another list of parts I can come up with by the 15th
Bike is mostly back together. I decided to ditch the factory wiring harness with all that unnecessary junk like turn signals and the horn I will make a much more simple harness for just the lights/e-start. I did the 'float the ground' mod to the stator already and have a Trail Tech reg/rec to go in to give me straight 12v DC output and eliminates the diodes/capacitor crap.
Stuck a new piston kit in it because why not. Also tore down the forks since I was already in there changing springs.
For the curious, this is what is inside a closed chamber Sachs fork. Pretty similar to the KYB and Showa guts actually. Stupid 7mm ID shims are a bummer. I'll put some miles on them stock and see how they feel. Worst case my Husky KYB forks are DAMN near bolt on
So wiring harness, tires/mousses, and some fluids is about it. Hope to get a few miles on it somewhere on Saturday.
Bike is mostly back together. I decided to ditch the factory wiring harness with all that unnecessary junk like turn signals and the horn I will make a much more simple harness for just the lights/e-start. I did the 'float the ground' mod to the stator already and have a Trail Tech reg/rec to go in to give me straight 12v DC output and eliminates the diodes/capacitor crap.
Stuck a new piston kit in it because why not. Also tore down the forks since I was already in there changing springs.
For the curious, this is what is inside a closed chamber Sachs fork. Pretty similar to the KYB and Showa guts actually. Stupid 7mm ID shims are a bummer. I'll put some miles on them stock and see how they feel. Worst case my Husky KYB forks are DAMN near bolt on
So wiring harness, tires/mousses, and some fluids is about it. Hope to get a few miles on it somewhere on Saturday.
-Joe.
'22 YZ250FX
'09 Husky WR177
'22 YZ250FX
'09 Husky WR177
- gots_a_sol
- DAMN Grand Poohba
- Posts: 1015
- Joined: Sat Jul 26, 2014 7:08 am
- Contact:
Re: This is what you do with new bikes, right?
Last thing I had to do to the bike was new tires + mousses. I went to let the air out of the old tires and oh hey, no valve stems, which means there are mousses in there already. Score!
Soooo, this is what happens when you don't lube a mousse.
I just changed the rear tire with a nitro mousse on my Husky which had 4 hare scrambles and 2 enduros on it. Still had some lube in there although it probably would have needed it before another enduro. Which worked out because I changed it the day before the national enduro
Soooo, this is what happens when you don't lube a mousse.
I just changed the rear tire with a nitro mousse on my Husky which had 4 hare scrambles and 2 enduros on it. Still had some lube in there although it probably would have needed it before another enduro. Which worked out because I changed it the day before the national enduro
-Joe.
'22 YZ250FX
'09 Husky WR177
'22 YZ250FX
'09 Husky WR177
- gots_a_sol
- DAMN Grand Poohba
- Posts: 1015
- Joined: Sat Jul 26, 2014 7:08 am
- Contact:
Re: This is what you do with new bikes, right?
Mmm, she looks good. Can't wait to toss her down the trail
-Joe.
'22 YZ250FX
'09 Husky WR177
'22 YZ250FX
'09 Husky WR177
- Marylander
- DAMN Admin
- Posts: 1428
- Joined: Wed Oct 16, 2013 8:13 pm
- Contact:
Re: This is what you do with new bikes, right?
They sure do make pretty bikes...
Re: This is what you do with new bikes, right?
Looks good Joe!
Yamaha WR250R
Yamaha TW200
Surron UltraBee
Yamaha TW200
Surron UltraBee
Re: This is what you do with new bikes, right?
Nice work!
Looking forward to riding with another Beta!
Looking forward to riding with another Beta!
F*** work.
Ride motorcycles.
Ride motorcycles.
- juddspaintballs
- DAMN Grand Poohba
- Posts: 1755
- Joined: Wed Nov 14, 2012 8:32 am
- Contact:
Re: This is what you do with new bikes, right?
BBQ a little close to the siding?gots_a_sol wrote: ↑Sun May 13, 2018 8:53 pmMmm, she looks good. Can't wait to toss her down the trail
Jed Gregory
1090 Adventure R
1090 Adventure R
- gots_a_sol
- DAMN Grand Poohba
- Posts: 1015
- Joined: Sat Jul 26, 2014 7:08 am
- Contact:
Re: This is what you do with new bikes, right?
I was wondering how long until somebody caught that Ugh, roommates...
-Joe.
'22 YZ250FX
'09 Husky WR177
'22 YZ250FX
'09 Husky WR177
Who is online
Users browsing this forum: No registered users and 18 guests