Yes, many hands make quick work. Thank you!juddspaintballs wrote: ↑Sat Mar 13, 2021 1:47 pm I'm going to try to make this if you'll have me. I have a saw and some loppers I can bring. Any chance I could bring a friend to help out?
I was unable get the old avatars reimported. Regretfully, you will have to upload your avatar again. Please report any issues here,.
Granville Workday & Rides 3/20
Re: Granville Workday & Rides 3/20
525EXC Jim's
250CRF James's
200XCW Jack's
225TTR Lauren's
400Big Bear Tanya's
The family that rides together always has someone to tell them why they crashed.
250CRF James's
200XCW Jack's
225TTR Lauren's
400Big Bear Tanya's
The family that rides together always has someone to tell them why they crashed.
Re: Granville Workday & Rides 3/20
Chainsaw appears to work now, and bike is almost back together. Looking prettt good as we head into the weekend. What time is everyone planning to start on Saturday??
2016 PitsterPro LXR-250f (Chinesium-KTM)
2001 Honda XR 200
History.... 1997 KDX 220, 1977 Ossa Phantom GPIII
2001 Honda XR 200
History.... 1997 KDX 220, 1977 Ossa Phantom GPIII
Re: Granville Workday & Rides 3/20
The official leg over the bike start time for trail work is 10:AM Saturday. I plan to be there Friday by 3:pm for you high achievers.
I also plan to revamp some sections, there will be some heavy lifting and cutting in the wood. I hope by 1:ish, we can just enjoy the loop.
I expect about 25-guys. Forecast looking good at the moment too.
Thanks guys.
I also plan to revamp some sections, there will be some heavy lifting and cutting in the wood. I hope by 1:ish, we can just enjoy the loop.
I expect about 25-guys. Forecast looking good at the moment too.
Thanks guys.
525EXC Jim's
250CRF James's
200XCW Jack's
225TTR Lauren's
400Big Bear Tanya's
The family that rides together always has someone to tell them why they crashed.
250CRF James's
200XCW Jack's
225TTR Lauren's
400Big Bear Tanya's
The family that rides together always has someone to tell them why they crashed.
- juddspaintballs
- DAMN Grand Poohba
- Posts: 1754
- Joined: Wed Nov 14, 2012 8:32 am
- Contact:
Re: Granville Workday & Rides 3/20
Anyone have a spare bike my buddy could ride? His DR650 might be a big big for some of the trails to be fun.
Jed Gregory
1090 Adventure R
1090 Adventure R
Re: Granville Workday & Rides 3/20
If I get the carb back on Friday, I could possibly bring a DRZ400. Waiting on a new accelerator pump diaphragm that is supposed to be delivered Friday. Can let you know Friday evening.juddspaintballs wrote: ↑Tue Mar 16, 2021 9:01 pm Anyone have a spare bike my buddy could ride? His DR650 might be a big big for some of the trails to be fun.
Member R&T Club, and GMER
- juddspaintballs
- DAMN Grand Poohba
- Posts: 1754
- Joined: Wed Nov 14, 2012 8:32 am
- Contact:
Re: Granville Workday & Rides 3/20
That would be awesome, thank you. We're bringing his DR650 along anyways. Florida boy isn't used to rocks, though.
Jed Gregory
1090 Adventure R
1090 Adventure R
Re: Granville Workday & Rides 3/20
The DRZ is ready, will bring it tomorrow. Just note, that it is a kick start, but it starts quite easily.juddspaintballs wrote: ↑Wed Mar 17, 2021 10:24 pm That would be awesome, thank you. We're bringing his DR650 along anyways. Florida boy isn't used to rocks, though.
Member R&T Club, and GMER
- juddspaintballs
- DAMN Grand Poohba
- Posts: 1754
- Joined: Wed Nov 14, 2012 8:32 am
- Contact:
Re: Granville Workday & Rides 3/20
Fantastic. Thank you! I think we'll be up there before 10. I've got some loppers and a battery chainsaw.
Jed Gregory
1090 Adventure R
1090 Adventure R
- juddspaintballs
- DAMN Grand Poohba
- Posts: 1754
- Joined: Wed Nov 14, 2012 8:32 am
- Contact:
Re: Granville Workday & Rides 3/20
jgreene wrote: ↑Fri Mar 19, 2021 8:17 pmThe DRZ is ready, will bring it tomorrow. Just note, that it is a kick start, but it starts quite easily.juddspaintballs wrote: ↑Wed Mar 17, 2021 10:24 pm That would be awesome, thank you. We're bringing his DR650 along anyways. Florida boy isn't used to rocks, though.
Thanks for letting my buddy Chris ride the DRZ today. A couple stalls forcing him to kick start it hot really wore him out. We didn't ride long with it. I topped the gas off before we left.
I had a great time riding today. Cutting that new path up the hill was a bit of work, but that new path is nice and seems easier than the old one currently is.
Jed Gregory
1090 Adventure R
1090 Adventure R
- Firebolter
- DAMN Grand Poohba
- Posts: 2467
- Joined: Wed Mar 03, 2010 9:19 am
- Contact:
Re: Granville Workday & Rides 3/20
Thanks JIm! Had a great time and was nice to open up the trails and cut in that new hill climb! Was good seeing alot of the R&T guys I haven't seen in a few years! And having Mike Giardi do a fly by for us, awesome having your own personal airshow to start off a work day!
Last edited by Firebolter on Sun Mar 21, 2021 9:08 am, edited 1 time in total.
Lots of cool bikes---