Those dont look like great tires for single track...juddspaintballs wrote: ↑Thu May 05, 2022 9:00 amNew, more street-oriented tires, chain, sprockets, and a shortened kick stand for the 1090 Adventure R.
I have been having problems with the server running out of resources and giving errors. It is better but I'm still getting some periodically. Please report any you get to me at ken@kyler.com.
What did you work on today?
Re: What did you work on today?
Yamaha WR250R
Yamaha TW200
Yamaha TW200
- juddspaintballs
- DAMN Grand Poohba
- Posts: 1754
- Joined: Wed Nov 14, 2012 8:32 am
- Contact:
Re: What did you work on today?
As long as the single track is paved, I'm good
Jed Gregory
1090 Adventure R
1090 Adventure R
- gots_a_sol
- DAMN Grand Poohba
- Posts: 1014
- Joined: Sat Jul 26, 2014 7:08 am
- Contact:
Re: What did you work on today?
Got my system up and running. Mostly a hodge podge of parts I had on hand but even before tuning it sounds 1000% better than stock.
Still need to tidy up some wiring and will eventually do sound deadening (front doors got some work while I was in there for the woofers)
Pods are from customspeakerpods.com, the aiming isnt perfect but they work and are cheaper/easier than full custom pods
This is the next part. All I've done so far is some basic time alignment.
CDT tweeters
Focal 3" mids
Image Dynamics 6.5" woofers
JL TWK 88 DSP
JL XD600/6 (running front 3 way)
JLXD400/4 (bridged for sub duties)
Pioneer slim 10" sub/box (will be replaced with something better eventually, just something I had around and it fit under the back seat with no mods)
Still need to tidy up some wiring and will eventually do sound deadening (front doors got some work while I was in there for the woofers)
Pods are from customspeakerpods.com, the aiming isnt perfect but they work and are cheaper/easier than full custom pods
This is the next part. All I've done so far is some basic time alignment.
CDT tweeters
Focal 3" mids
Image Dynamics 6.5" woofers
JL TWK 88 DSP
JL XD600/6 (running front 3 way)
JLXD400/4 (bridged for sub duties)
Pioneer slim 10" sub/box (will be replaced with something better eventually, just something I had around and it fit under the back seat with no mods)
-Joe.
'22 YZ250FX
'09 Husky WR177
'22 YZ250FX
'09 Husky WR177
-
- DAMN Expert
- Posts: 392
- Joined: Wed Nov 09, 2011 7:42 pm
- Contact:
Re: What did you work on today?
Kraco and some Jensen 6x9's and I'm ready to rock...but you do you.gots_a_sol wrote: ↑Sun May 22, 2022 3:58 pmGot my system up and running. Mostly a hodge podge of parts I had on hand but even before tuning it sounds 1000% better than stock.
Still need to tidy up some wiring and will eventually do sound deadening (front doors got some work while I was in there for the woofers)
Pods are from customspeakerpods.com, the aiming isnt perfect but they work and are cheaper/easier than full custom pods
This is the next part. All I've done so far is some basic time alignment.
CDT tweeters
Focal 3" mids
Image Dynamics 6.5" woofers
JL TWK 88 DSP
JL XD600/6 (running front 3 way)
JLXD400/4 (bridged for sub duties)
Pioneer slim 10" sub/box (will be replaced with something better eventually, just something I had around and it fit under the back seat with no mods)
'00 KTM 300EXC Brakes just slow you down
'06 VTX1300r
'06 VTX1300r
What did you work on today?
@J&J How’s that Coyote swap going?
- gots_a_sol
- DAMN Grand Poohba
- Posts: 1014
- Joined: Sat Jul 26, 2014 7:08 am
- Contact:
Re: What did you work on today?
Finally got around to welding the tabs in place for the ram on my trailer. Waiting on a new jack and a winch to arrive now.
-Joe.
'22 YZ250FX
'09 Husky WR177
'22 YZ250FX
'09 Husky WR177
- juddspaintballs
- DAMN Grand Poohba
- Posts: 1754
- Joined: Wed Nov 14, 2012 8:32 am
- Contact:
Re: What did you work on today?
Welded up a weld-it-yourself bumper kit for my 4Runner project. It's in primer now waiting on my bedliner kit to arrive. I have a back bumper and tire carrier to build, too.
Jed Gregory
1090 Adventure R
1090 Adventure R
- gots_a_sol
- DAMN Grand Poohba
- Posts: 1014
- Joined: Sat Jul 26, 2014 7:08 am
- Contact:
Re: What did you work on today?
juddspaintballs wrote: ↑Mon May 30, 2022 8:02 pmWelded up a weld-it-yourself bumper kit for my 4Runner project. It's in primer now waiting on my bedliner kit to arrive. I have a back bumper and tire carrier to build, too.
Actually a decent looking bumper compared to most of those things. Who makes the kit?
-Joe.
'22 YZ250FX
'09 Husky WR177
'22 YZ250FX
'09 Husky WR177
- juddspaintballs
- DAMN Grand Poohba
- Posts: 1754
- Joined: Wed Nov 14, 2012 8:32 am
- Contact:
Re: What did you work on today?
Coastal Offroad up in Canoodia. The back is a really high clearance kit that immensely improves the angle of departure for this generation 4Runner. It has an integrated hitch, too.
Jed Gregory
1090 Adventure R
1090 Adventure R
Re: What did you work on today?
Changing the tires on the 701 in preparation for the NEBDR. Taking off the oem TKC80s and spooning on Tusk DSport Adventures. That was the plan at least. Today I learned:
1) These tires have REALLY stiff sidewalls. Dog help me if I ever have to fix it on the trail.
2) 701 has a cush drive
3) said cush drive doesn't hold down a tire spoon very securely when you try to hook them under it.
So I probably have a scar now.
I'm hot, tired, the shade is gone, and its lunchtime. I'll do the front tire tomorrow.
Lesson learned: I should have gone riding w/ Phil today.
1) These tires have REALLY stiff sidewalls. Dog help me if I ever have to fix it on the trail.
2) 701 has a cush drive
3) said cush drive doesn't hold down a tire spoon very securely when you try to hook them under it.
So I probably have a scar now.
I'm hot, tired, the shade is gone, and its lunchtime. I'll do the front tire tomorrow.
Lesson learned: I should have gone riding w/ Phil today.
- Attachments
-
- 20220602_DsportAdv_TKC80.jpg (383.51 KiB) Viewed 7044 times
-
- 20220602_tireIronForehead.jpg (214.97 KiB) Viewed 7044 times
-
- 20220602_701CushDrive.jpg (473.97 KiB) Viewed 7044 times
Stephen (not Steve) - '20 Husky 701LR / KTM '20 500 EXC / '17 150 XC-W / '21 E-XC / '21 890R / '19 Sherco 300FST / Sur-Ron LBX / Segway X160 / Sur-Ron Ultra Bee
Who is online
Users browsing this forum: No registered users and 17 guests