Nice! That's gonna be a quick and relatively sleeper looking GT! I need to swap out my 2.73 for a 3.42 I currently have. That will wake her up quite a bit!J&J wrote: ↑Tue Feb 07, 2023 4:06 pm Still has the stock 8.8 which is plenty strong for street use. We have some 3.73 gears that we haven’t installed yet.
The weak link is the T45 transmission. It’s not rated for the horsepower or shifting at 7500 rpm. Jacob starts working next week and a TKX set up is on his list.
I was unable get the old avatars reimported. Regretfully, you will have to upload your avatar again. Please report any issues here,.
What did you work on today?
- Firebolter
- DAMN Grand Poohba
- Posts: 2346
- Joined: Wed Mar 03, 2010 9:19 am
- Contact:
Re: What did you work on today?
Lots of cool bikes---
Re: What did you work on today?
Cut a pretty good section of new trail!
Big thanks to Matt and Stephen.
Big thanks to Matt and Stephen.
Yamaha WR250R
Beta Xtrainer
Sherco 290 trials
Beta Xtrainer
Sherco 290 trials
- Firebolter
- DAMN Grand Poohba
- Posts: 2346
- Joined: Wed Mar 03, 2010 9:19 am
- Contact:
Re: What did you work on today?
Finished up the loop the boyz started last week yesterday and burned it in. Nice and flowing! Phil, Matt and I scouted some other possibilities! What a great day yesterday to be out in the woods.
Lots of cool bikes---
Re: What did you work on today?
I did some more trailwork today. Cleaned up this new section a little bit more. Rerouted another section of the Pink trail too.
This is that bigger log on the new pink section. I cut a piece out of it, so people can avoid the log if they want. And I left a big piece so people can hop it too.
This is that bigger log on the new pink section. I cut a piece out of it, so people can avoid the log if they want. And I left a big piece so people can hop it too.
Yamaha WR250R
Beta Xtrainer
Sherco 290 trials
Beta Xtrainer
Sherco 290 trials
- Marylander
- DAMN Admin
- Posts: 1417
- Joined: Wed Oct 16, 2013 8:13 pm
- Contact:
Re: What did you work on today?
A package arrived for the Xtrainer from Italy this morning:
- gots_a_sol
- DAMN Poohba
- Posts: 987
- Joined: Sat Jul 26, 2014 7:08 am
- Contact:
Re: What did you work on today?
No more 'zokes?
-Joe.
GMER/WATR member
'17 Beta 250RR/RE
'09 Husky WR177
'17 Oset 20.0
GMER/WATR member
'17 Beta 250RR/RE
'09 Husky WR177
'17 Oset 20.0
- Marylander
- DAMN Admin
- Posts: 1417
- Joined: Wed Oct 16, 2013 8:13 pm
- Contact:
Re: What did you work on today?
Parts are impossible now as they moved on to mountain bike suspension (after being bought out). I should be able to get parts for the new ones 30+ years from now.
Re: What did you work on today?
Awesome!Marylander wrote: ↑Mon Mar 27, 2023 12:32 pm A package arrived for the Xtrainer from Italy this morning:
Boano_KYB.jpg
Hope to see you riding soon
Yamaha WR250R
Beta Xtrainer
Sherco 290 trials
Beta Xtrainer
Sherco 290 trials
- Firebolter
- DAMN Grand Poohba
- Posts: 2346
- Joined: Wed Mar 03, 2010 9:19 am
- Contact:
Re: What did you work on today?
My bikes are all ready for the season! But I did need to do some other vehicle maint this past weekend! Did a complete Brake Fluid flush and now the fluid is pretty and clean! Put new sway bar ends on all four corners and new Z06 spec Bilstien shocks on all 4 corners! Lastly, new Bi-LED ACA headlights to get rid of those DAMN yellow halogen GM lights that suck! Makes the car look newer than 21 years old! Just about ready for some track days!

[


Lots of cool bikes---