I have been having problems with the server running out of resources and giving errors. It is better but I'm still getting some periodically. Please report any you get to me at ken@kyler.com.
Machine Shop Recommendation?
Machine Shop Recommendation?
I live in Frederick (Braddock Heights) and just need a steering stem pressed out of a triple clamp, turned down to a smaller diameter and pressed back in place.
Looking for recommendation on where to take it.
THANKS!
OFG
Looking for recommendation on where to take it.
THANKS!
OFG
Sam Jones - Frederick MD
GL1800 DCT TRIO Tilting Trike - KTM 525 EXC - KTM 200 XCW - 2 KTM Freeride 250Rs - TRS 300 Xtrack Trials
Lots of E-Bikes/MCs
Polaris RZR 800
Lots of MTBs and Road Bikes and a BamBuk Recumbant Tandem Trike eBike
GL1800 DCT TRIO Tilting Trike - KTM 525 EXC - KTM 200 XCW - 2 KTM Freeride 250Rs - TRS 300 Xtrack Trials
Lots of E-Bikes/MCs
Polaris RZR 800
Lots of MTBs and Road Bikes and a BamBuk Recumbant Tandem Trike eBike
Re: Machine Shop Recommendation?
call Curtis at Full Circle V-Twin in Hagerstown. (240) 347-4663
Tell him I sent ya.
Tell him I sent ya.
Ken
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Re: Machine Shop Recommendation?
X2 for Curtis
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: Machine Shop Recommendation?
I had one excellent result with Curtis. BUT the last time is was pretty much a disaster. He took a month to do a one or two hour job even after I told him I REALLY needed it in a few days (2 weeks into the month) and sort of refused to answer my inquiries as to what was happening. etc. So I need to go somewhere else.
Sam Jones - Frederick MD
GL1800 DCT TRIO Tilting Trike - KTM 525 EXC - KTM 200 XCW - 2 KTM Freeride 250Rs - TRS 300 Xtrack Trials
Lots of E-Bikes/MCs
Polaris RZR 800
Lots of MTBs and Road Bikes and a BamBuk Recumbant Tandem Trike eBike
GL1800 DCT TRIO Tilting Trike - KTM 525 EXC - KTM 200 XCW - 2 KTM Freeride 250Rs - TRS 300 Xtrack Trials
Lots of E-Bikes/MCs
Polaris RZR 800
Lots of MTBs and Road Bikes and a BamBuk Recumbant Tandem Trike eBike
Re: Machine Shop Recommendation?
I had a similar experience several years ago. I thought he was reformed. Hopefully that was an exception.BigBird wrote:I had one excellent result with Curtis. BUT the last time is was pretty much a disaster. He took a month to do a one or two hour job even after I told him I REALLY needed it in a few days (2 weeks into the month) and sort of refused to answer my inquiries as to what was happening. etc. So I need to go somewhere else.
Ken
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
- anotherguy
- DAMN Expert
- Posts: 439
- Joined: Thu Sep 01, 2011 7:04 am
- Contact:
Re: Machine Shop Recommendation?
Bill Coleman Linthicum MD. A bit of a drive for you but he will do a good job and not burn you on cost. 410-799-2906 I've known Bill since I was a kid and he's always been busy so if you're in a hurry he may not be your guy. Nicest guy you'll ever meet.
Re: Machine Shop Recommendation?
A buddy of mine tells me all kinds of stories from when he used to work at Coleman Brother Speed Shop; I think Bill was one of the owners. From the stories, it was a pretty fun place to work....anotherguy wrote:Bill Coleman Linthicum MD. A bit of a drive for you but he will do a good job and not burn you on cost. 410-799-2906 I've known Bill since I was a kid and he's always been busy so if you're in a hurry he may not be your guy. Nicest guy you'll ever meet.
-
- DAMN Expert
- Posts: 442
- Joined: Wed Jan 14, 2009 3:57 pm
- Contact:
Re: Machine Shop Recommendation?
Man that was a great place. I spent many my days in my youth there.Skinny-J wrote:A buddy of mine tells me all kinds of stories from when he used to work at Coleman Brother Speed Shop; I think Bill was one of the owners. From the stories, it was a pretty fun place to work....anotherguy wrote:Bill Coleman Linthicum MD. A bit of a drive for you but he will do a good job and not burn you on cost. 410-799-2906 I've known Bill since I was a kid and he's always been busy so if you're in a hurry he may not be your guy. Nicest guy you'll ever meet.
Sent from my iPhone using Tapatalk
2019 Husqvarna TE250i
2014 KTM 350 XCF-W Six Days
2012 GASGAS 280 TXT Racing
2014 KTM 350 XCF-W Six Days
2012 GASGAS 280 TXT Racing
Re: Machine Shop Recommendation?
I have a lathe but no press.
Ken
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Re: Machine Shop Recommendation?
Wow, small world. Did you know a counter-guy named Tom Lenhoff? That's my buddy...trialsrider wrote:
Man that was a great place. I spent many my days in my youth there.
Who is online
Users browsing this forum: No registered users and 38 guests