I have been having problems with the server running out of resources and giving errors. It is better but I'm still getting some periodically. Please report any you get to me at
ken@kyler.com.
Want to go for a DAMN Ride? So do we!
-
Boom Boom
- DAMN Grand Poohba
- Posts: 3330
- Joined: Wed Aug 26, 2009 7:26 am
-
Contact:
Post
by Boom Boom » Thu Mar 10, 2016 3:51 pm
Skinny-J wrote:Watsy (to his close personal friends like me; who bought his DVD) also talks about a technique he calls the "Watsy-wiggle". It works best when standing and you kinda throw the bike side to side and "weave" the bars through the tight spot. This is what I try to do and it works fairly well when you need that x-tra inch or 2.
+1 with SJ.
I trim a 1/2" each side.
If you can stand the wiggle works fine rocking the bike side to side.
If you can't stand then aim the front wheel for the base of the tree you would have to lean the bike around and go thru in a zig zag fashion. Don't drive up the middle fighting the bars back and forth.
2022 TRS 300 E-start
2021 Beta 300rr
-
juddspaintballs
- DAMN Grand Poohba
- Posts: 1754
- Joined: Wed Nov 14, 2012 8:32 am
-
Contact:
Post
by juddspaintballs » Thu Mar 10, 2016 6:12 pm
Mine are 31" wide with HBD hand guards, so probably closer to 31.75" now. I really like these HDB guards. I'll spend the extra money on them from now on. I think the basic setup is only $150 and far superior to any other design I've seen yet.
I'm riding up with Bucho, so you'll see me when you find his Ram Van. I'm sleeping in a tent nearby.
Just a reminder...we'll be losing an hour of sleep the night before the race. Don't forget to set your clocks ahead.
I'll be treating this like a trail ride as well. I'm still pretty slow.
Jed Gregory
1090 Adventure R
-
J&J
- DAMN Grand Poohba
- Posts: 1003
- Joined: Sat Jan 05, 2013 10:54 pm
-
Contact:
Post
by J&J » Thu Mar 10, 2016 6:59 pm
Thanks guys, I'm going with 1/2" off each end. They are 32" now that I have the grips & throttle tube off so they'll be about that when done.
Jed I'll see you on the way up, riding with you guys. I couldn't decide about the HDB guards without seeing them in person. I got BRP triple tree mounts with Enduro Engineering guards. I know I like how they look & plan to get the HDB thread in inserts & they will be almost as sturdy as the HDBs.
I have heard about ALL those tight tree maneuvers, maybe we can get Wingfixer to demo them for us so we can decide which one is best.
Somebody bring a Go Pro
-
Rut Row
- DAMN Grand Poohba
- Posts: 9766
- Joined: Sat Mar 08, 2008 3:39 am
-
Contact:
Post
by Rut Row » Thu Mar 10, 2016 7:25 pm
J&J wrote:I have heard about ALL those tight tree maneuvers, maybe we can get Wingfixer to demo them for us so we can decide which one is best.
Somebody bring a Go Pro
I'd pay to see that!
Ken
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
-
Wingfixer
- aka FlatFixer
- Posts: 4012
- Joined: Tue Nov 18, 2008 4:20 pm
-
Contact:
Post
by Wingfixer » Thu Mar 10, 2016 9:08 pm
juddspaintballs wrote:
Just a reminder...we'll be losing an hour of sleep the night before the race. Don't forget to set your clocks ahead.
Shit.
F*** work.
Ride motorcycles.
-
Glenduro
- DAMN Expert
- Posts: 149
- Joined: Fri Jan 08, 2016 7:45 am
-
Contact:
Post
by Glenduro » Thu Mar 10, 2016 9:09 pm
Skinny-J wrote:J,
On all my bikes I have cut off 1/2" on each side so after adding bark-busters, the bars remain at their original width. This is what Rich Laferty recommended when we took his riding course. I can measure tonight but on my 2 Yamies, both bars are the stock pro-tapers and IIRC they are currently 32" with bark busters.
Think about it this way, how often are you really bangin through tight-ass trees? Set the bike up for how you use it MOST of the time and if occasionally you have to slow down and wiggle through a spot; so what. Start with 1/2" and if you don't like it, you can always cut off more (but its a lot harder to add it back on!)
The other option is to just ride a wheelie through the trees with the bars turned sideways...
SJ
I prefer to watch this method :)
Glenduro
Been there, Done that , and bought the replacement parts
Honda CRF450X
Honda XR650L
-
Wingfixer
- aka FlatFixer
- Posts: 4012
- Joined: Tue Nov 18, 2008 4:20 pm
-
Contact:
Post
by Wingfixer » Thu Mar 10, 2016 9:11 pm
J&J wrote:
I have heard about ALL those tight tree maneuvers, maybe we can get Wingfixer to demo them for us so we can decide which one is best.
Somebody bring a Go Pro
F*** work.
Ride motorcycles.
-
Wingfixer
- aka FlatFixer
- Posts: 4012
- Joined: Tue Nov 18, 2008 4:20 pm
-
Contact:
Post
by Wingfixer » Thu Mar 10, 2016 9:11 pm
Kyler wrote:J&J wrote:I have heard about ALL those tight tree maneuvers, maybe we can get Wingfixer to demo them for us so we can decide which one is best.
Somebody bring a Go Pro
I'd pay to see that!
You too mister.
F*** work.
Ride motorcycles.
-
Bucho
- DAMN Admin
- Posts: 6549
- Joined: Sat Mar 08, 2008 10:57 am
-
Contact:
Post
by Bucho » Sat Mar 12, 2016 11:00 pm
Hanging out in the SkinnyJ Adventure Trailer the night before.
We are all excited
Yamaha WR250R
Yamaha TW200
-
Rut Row
- DAMN Grand Poohba
- Posts: 9766
- Joined: Sat Mar 08, 2008 3:39 am
-
Contact:
Post
by Rut Row » Sun Mar 13, 2016 8:50 am
adventure trailer? holy cow - I've lived in worse places.
Ken
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Who is online
Users browsing this forum: No registered users and 51 guests